11
SERVICE WORK ON THE CHASSIS
–
Now inject the liquid into the system until it emerges from the drill hole
master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
–
Position the cover with the membrane. Mount and tighten the screws.
L01223-10
Info
Clean up overflowed or spilled brake fluid immediately with water.
4 mm (0.16 in)
61
6
of the