KTM 125 SX 2018 Owner's Manual page 44

11 SERVICE WORK ON THE CHASSIS
–
Position the fork legs.
Bleeder screw
Valve
Info
The air suspension AER valve is located in the left fork leg.
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
H01182-11
–
Tighten screws
Guideline
Screw, bottom triple clamp
K00473-10
–
Tighten screw
Guideline
Screw, top steering head
K00465-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
F00028-10
–
Tighten screws
Guideline
Screw, top triple clamp
K00473-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
K00462-12
5
of the right fork leg is positioned to the front.
A
of the left fork leg faces the front.
6
.
4
.
7
.
M8
8
.
M8
M8 12 Nm (8.9 lbf ft)
M20x1.5 12 Nm (8.9 lbf ft)
20 Nm Loctite
(14.8 lbf ft)
M8 17 Nm
(12.5 lbf ft)
9
.
25 Nm Loctite
(18.4 lbf ft)
bk
.
42
® 243™
® 243™