RocketFish EX7 Quick Setup Manual

What's in the box:
Send/end button
1 Rocket sh RF-EX7 Bluetooth headset
LED light
1 charger
1 USB charging cable
1 Quick Setup Guide (what you're looking at)
4 round earbuds
3 tted earbuds (medium size is pre-attached)
1 ear loop
Charger
Headset
Ear bud
Charging port
with cover
Fitted earbuds Round earbuds Ear loop
2 Press and hold the power button for 3
1 Power & Pair
seconds to turn on your headset. It will
automatically enter pairing mode when
you turn it on for the rst time. When in
1 Lift the charging port cover, then pairing mode, the LED light will blink
Green.(on con rmation)
connect the charger.
Volume
When, the indicator changes from red to
touch pad
green, and you can disconnect the
charger.(See no.11 and no. 36)
LED light
What is PureSpeech®?
PureSpeech is a state-of-the-art noise cancelation and signal processing technology
created by SRS Labs and CSR. Your EX7 headset incorporates PureSpeech so that you
can hear your calls in amazing clarity, but also so you can be heard clearly by your
callers. PureSpeech is always activated on the EX7 so you will "Hear and Be Heard Like
Never Before."
On/O
(reverse side)
3 Activate Bluetooth on your phone,
then set your phone to search for nearby
Bluetooth devices. For help with this step,
see your cell phone's user guide.
4 When your phone detects the RF-EX7,
select it on the list, then enter "0000"
Bottom view
(zeros) for the PIN. The headset beeps and
the indicator turns green.
To turn o the headset, press and hold the
power button for about two seconds.
To use a tted earbud:
2 Get the perfect t
1 Attach the appropriate size
of tted earbud onto the
Use one of the tted earbuds for the most
headset. The medium tted
convenient and comfortable t, or alternatively use
earbud is already attached.
a round earbud in combination with the ear loop.
2 Insert the headset vertically in
your ear (shown in step 2)
To use a rounded earbud:
3 Rotate the headset up towards
1 Remove the tted
earbud that's already your mouth. The exible
attached, then press
portion of the ear bud should
the round earbud
t securely towards the back
onto the headset.
of your outer ear.
2 Attach the ear loop
You may need to guide it to a
for a secure t.
comfortable position with
your nger.
v1
R7