TP-Link TL-WR841N User Manual page 3

User Guide
TP-LINK TL-WR841N nbn™ + Voice Wireless Router
Setting up your TP-LINK Wireless Router
Do not power on your router until you have completed the steps below.
Step 1: Equipment check
Once you've received your Service Activation email from ACN, take out the following pieces of equipment.
Ethernet cable TP-LINK Wireless Router
Step 2: Connecting to the nbn™ Broadband
Connect one end of the Ethernet cable into the blue WAN port on the back panel of your router. Remove the cover
from the nbn™ connection box and look at the bottom of the unit for the UNI-D ports. Connect the other end of the
Ethernet cable to the first available UNI-D port.
WAN
port
Router
Step 3: Plug in your Analogue Telephone Adaptor (ATA)
Plug one end of the supplied power pack & cable into the ATA and plug the other end to a power outlet. This should
automatically turn on the device.
Powerpoint
Step 4: Connecting your Phone Service
Take the remaining supplied Ethernet cable and connect one end into an available orange LAN port on your router
and the other end into the Internet port on the ATA.
Router
©2016 ACN Inc. All rights reserved
MKT-3051 29.11.2016
Power adaptor
MODEM BOX
Power pack & cable
ACN Pacific Pty Ltd
Analogue Telephone
Adaptor (ATA)
Ethernet cable
Ethernet cable
ABN 85 108 535 708
Power pack & cable Ethernet cable
ATA BOX
UNI-D ports
nbn™ connection box
Analogue Telephone Adaptor
Analogue Telephone Adaptor
Customer Service 1300 881 778 acnpacific.com
Page 3 of 7