Features & Controls; Rider Features & Controls - Simplicity 1692380 Replacement Operators Manual

Coronet series; 400 series; 2400 series gear riding; hydro riding; movie decks
Hide thumbs Also See for 1692380:
Table of Contents

Advertisement

Features & Controls
RIDER FEATURES & CONTROLS
Figure 2. Rider Features
REF
NAME
A
Mower Lift Lever
B
Fuel Tank
C
Ignition Switch
D
Auto-Levelling Rod
E
Mower Hitch
F
Mower Deflector
G
PTO (Electric Clutch) Switch
H
Ground Speed Control Lever
I
Clutch/Brake Pedal
J
Parking Brake Control Knob
K
Dial-A-Cut Control
L
Seat Adjustment Lever
M
Engine Throttle/Choke Lever
N
Seat Deck
O
Drawbar
P
Engine Muffler
Q
Mower Levelling Nut
FUNCTION
Raises mower into transport position.
2 gal. (7.6L) see-through tank for fuel level reading.
Starts and stops the engine.
TM
Allows mower hitch (E) to raise and lower around very tight corners while mower
remains level.
Quick-hitch system allows easy removal and installation of mower and
attachments
Deflector is a necessary safety device to control objects thrown from the deck. Never
mow without deflector in place.
Controls electric clutch for attachments. Pull out to engage PTO; push in to disengage
PTO.
Controls ground speed and forward/reverse motion. Push forward to go forward; pull
back to go in reverse. On hydro models, ground speed is controlled by how far lever is
in forward or reverse position.
Press down to disengage clutch and apply brake. For parking brake, depress pedal
fully and pull up on parking brake control knob (J).
Engages parking brake. Depress clutch/brake pedal (I) fully and pull up knob to engage
parking brake. To disengage brake, depress pedal and push knob down.
TM
Adjusts height of mower cut.
Automotive-style lever to allow seat to slide forward and backward.
Push forward to increase engie RPM. Push all the way forward for choke position.
Lightweight polymer-alloy deck lifts up for easy access to engine compartment.
For use with utility carts or rear-mounted attachments, such as Twin Bag Grass
Catcher.
Exhausts hot air to the right side away from the fuel tank. Use caution around the heat
shields and muffler until hot surfaces cool after operation.
Allows for the accurate side-to-side levelling of mower deck.
6
*2395

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents