Reebok 8600 ES treadmill RBTL09506.0 User Manual page 9

8. Remove the band securing the Upright Wire
Harness (73) to the right Upright (85). Have a
second person hold the console assembly near
the right Upright.
Connect the Upright Wire Harness (73) to the
wires extending from the console assembly.
Make sure to connect the connectors prop-
erly (see the inset drawing). The connectors
should slide together easily and snap into
place. If the connectors do not, turn one connec-
tor and try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON-
SOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON. Then, insert the con-
nectors into the right Upright (85).
9. Attach the console assembly to the Uprights (85)
with four Console Bolts (72) and four 3/8" Star
Washers (67) (only one side is shown). Start all
four Console Bolts before tightening any of
them.
10. See drawing 10a. Remove the indicated 3/4"
Screw (7) from the right Handrail (70).
See drawing 10b. Slide the Right Upright Sleeve
(9) up to the console assembly. Attach the Right
Upright Sleeve with two 1" Tek Screws (82) and
the 3/4" Screw (7) as shown.
Attach the Left Upright Sleeve (not shown) in the
same way.
8
Console
Assembly
73
85
9
85
67
10a
70
7
9
73
72
Console
Assembly
10b
Console
Assembly
7
9
82