Reebok 8600 ES treadmill RBTL09506.0 User Manual page 20

If the speed or incline setting for the current seg-
ment is too high or too low, you can override the
setting by pressing the Speed or Incline buttons;
however, when the console compares your heart
rate to the current target heart rate setting, the
speed or incline of the treadmill may automatically
change.
To stop the program at any time, press the Stop
button. To restart the program, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the console compares your heart rate to the
current target heart rate setting, the speed or in-
cline of the treadmill may automatically change.
If Pulse program 1 is selected, the program will
continue until you stop it by pressing the Stop but-
ton. If Pulse program 2 is selected, the program
will continue until the small arrow reaches the
right end of the profile. The walking belt will then
slow to a stop.
Turn on the fan if desired.
8
See step 8 on page 16.
When you are finished exercising, remove the
9
key from the console.
See step 8 on page 18.
20