Rj-45 Board With Bracket - HP EliteBook 846 G5 Maintenance And Service Manual

RJ-45 board with bracket

Description
RJ-45 board with bracket
Before removing the RJ-45 board and bracket, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the RJ-45 board and bracket:
1. Remove the six Phillips M2.5×5.0 screws (1) that secure the assembly to the computer.
2. Rotate the assembly out of the computer (2).
Reverse this procedure to install the RJ-45 assembly.
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 32).
Battery on page 45).
Spare part number
not spared