Simplicity 1692356 Operator's Manual page 11

8. See Figure 13. Secure the rear backing plate of
the pin (A) and hairpin clip (B) supplied with the
snowthrower.
9. See Figure 14. Turn belt adjuster handle (C) to
move trunnion (A) completely forward. Install belt
onto the electric clutch pulley. Turn belt adjuster
handle until trunnion is located between the
marks as shown for proper belt tension.
NOTE: If trunnion cannot be p/aced between marks,
loosen capscrew (0, Figure 14) and reposi-
tion idler pulley (E) as necessary.
Upper Hole for Broadmoor I1 600 / 2600
Lower Hole for Landlord I1700 I2700
Figure 13. Attaching Snowthrower Hitch to Rear
Support Assy.
A. Pin
I
Figure 14. Installing Belt
A. Trunnion
C. Handle
9
40" SNOWTHROWER
B. Safety Clip
D. Capscrew
E. Pulley