Firmware Version; Sim-Card (Only R0011) - ABB RTU560 Operation Manual

RTU560
Connections and Settings
Communication Unit 560CMD11

Firmware Version

The current firmware version will be delivered on
a CompactFlash memory card. A new firmware
file can be loaded via the Web diagnostic tool into
the removable CompactFlash memory card.
For changing the CompactFlash memory card the
right side of the housing has to be opened (see
Fig. 8 and Fig. 11).
For changing the CF - card
! !
follow the instructions below:
1. Disconnect the power-supply of the
560CMD11.
2. Take care of ESD protection before
opening the 560CMD11 housing.
3. Open the 4 screws on the right side of
the housing (see Fig. 8 and Fig. 11).
4. Pull or plug only the CF-card. Don't
touch other components.
5. Close the housing before the power-
supply is connected to the 560CMD11
Doc.-No.: 1KGT 150 765 V005 1

SIM-Card (only R0011)

For communication via the GSM/GPRS modem a
pluggable SIM-Card (ID-000) is necessary.
For changing the SIM-Card the right side of the
housing has to be opened (see Fig. 11).
For changing the SIM-Card
! !
follow the instructions below:
1. Disconnect the power-supply of the
560CMD11.
2. Take care of ESD protection before
opening the 560CMD11 housing.
3. Open the 4 screws on the right side of
the housing (see Fig. 11).
4. Pull or plug only the SIM-Card. Don't
touch other components.
5. Close the housing before the power-
supply is connected to the 560CMD11

6