Table of Contents
Advertisement
TV WITH
RF JACK AND
SATELLITE
RECEIVER
This connection assumes:
•
You have a basic satellite system.
•
Your TV does not have audio/video input jacks.
This connection
provides:
•
Mono
sound playback
from VCR.
•
Recording
from a satellite
receiver.
•
Recording one off-air or cable channel while watching another.
If your digital satellite receiver is remote controllable:
•
Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To use this connection, you must have:
•
(4) coaxial cables and (3) audio/video cables
To connect:
1.
Connect cables as shown.
2.
Return to the First Things First Section, then follow the steps.
Using This Connection
•
Tune your TV to channel 3 or 4, whichever one you selected
with the 3CH4 switch on the back of the VCR.
To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the CH3/CH4
switch on the back of the receiver. Turn off receiver.
To watch and/or record from the satellite
receiver, tune your
VCR to its line input (LINE appears in display).
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to ON.
To play a tape:
1.
Insert a tape.
2.
If necessary,
press VCR and then
PLAY.
To record one off-air or cable program
and watch another:
1.
Turn off the satellite
receiver and begin recording
a program
using a recording
feature.
2.
Press TVeVCR
and select a different
channel
on the TV.
To record a satellite receiver program:
1.
Turn on the satellite
receiver, tune the VCR to its line input,
and begin recording a program using a recording feature.
• Caution
The unauthorized
recording of
satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
CABLECABLE BOX OR_ANTENNA
SATELLITERECEIVE_R
I
_o
VCR
CH
3qP4
n_
SATELLITE SIGNAL
| AUD40__J.
r
TV
55
Advertisement
Table of Contents
