Table of Contents
Advertisement
F.ADV (Frame Advance)
Lets you view one frame with each
press of the button when tape is in pause.
FWD (Foward)
Fast forwards
the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow-
motion during play-pause and increasesslow-motion speed.
GO BACK
Switches
between
two channels.
Select one channel
and
then select another
using the number
buttons.
Press GO BACK to
switch between
the two channels. In menu mode,
press to go back to
previous
menu.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and the VCR's tuner. Line
input refers to the signal coming from the component
connected
to the audio/video input jacks on the back of the VCR.
MENU.PROG
Displays VCR MAIN MENU on the TV screen. Used
to select a menu item or exit a menu.
MOVE (Arrow
Buttons)
Allow you to move through the
menus, enter data, and change settings of selected features.
Numbers
(0 through
9)
Select a channel
up to 99 by pressing
two numbers.
Select a cable channel
over 99 by pressing and
holding
1 until 1 --
appears
on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording.
Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
PWR Turns off the VCR when the remote is set to control
the VCR.
REC Starts VCR recording.
Also used for express recording.
REV Rewinds the tape when the VCR is stopped.
Searches
backward through a tape during playback. Starts slow-motion
playback when tape is paused and decreases speed of slow-motion
playback.
SEARCH Displays Index and Go-To Search menus on TV screen
when VCR is stopped.
Advances the tape 30 seconds of recorded
material
during playback.
SLOW + AND - Used for slow-motion
playback. Press + to
increase the speed or - to decrease the speed.
SPEED
Selects a recording
speed (SP or SLP).
I
TV Buttons
1
The TV buttons may not control all
features of all models of RCA,
ProScan, and GE 1"Vs.
23
Advertisement
Table of Contents
