Sony XA-CC1 Operating Instructions

Features
The XA-CC1 is a connection adapter for connecting a car cradle to a Sony master unit having the CD/
MD changer control function.
Sony car audio units being compatible with PEGA-CC5 include:
— Units with CD/MD changer control from 2004 forward
— Following units
MEX-5DI, CDX-M1000TF, CDX-MP80, CDX-M850MP, CDX-M800, CDX-MP40, CDX-CA680X,
CDX-MP70, CDX-MP30, CDX-M730, CDX-M630, CDX-CA900, CDX-CA700X, CDX-CA700,
CDX-CA600X, CDX-CA600, MDX-CA790X, MDX-M690, MDX-CA680X, MDX-CA580, XR-CA670X,
XR-CA370X, XR-CA370, XR-CA630X, XR-CA430X, XR-CA440, XR-CA600V, XR-CA600

Specifications

Power requirement 12 V DC negative earth
Approx. 97.2 × 55.7 × 23.7 mm (3
Dimensions
(not including connection cable)
Mass Approx. 260 g (10 oz)
(including connection cable)
Input Car cradle I/O input (8pin)
Output SONY-BUS control output (8pins)
SONY-BUS audio output (RCA-pin)
ATT control output
Design and specifications are subject to change without notice.
Installation
Before installation
•Choose the installation location carefully so that the unit does not interfere with normal driving
operations.
•Avoid installing the unit where it would be subject to :
— high temperatures, such as from direct sunlight or hot air from the heater.
— draft, rain or moisture.
— dust or dirt.
— magnetic fields.
•Install the unit in a location that does not obstruct the operation of passenger-side airbag.
Installation location
You are recommended to install the unit inside the car panel or glove box.
Please consult a qualified technician or service personnel if you cannot attach the connection adapter
to the car securely.
If you have any questions or problems concerning your unit that are
not covered in this manual, please consult your nearest Sony dealer.
Contents of this manual are printed on using
VOC (Volatile Organic Compound)-free vegetable-oil-
based ink.
× 2 ×
7 / 1 / 15 / in.) (w/h/d)
8 4 16
Connection Adapter
Operating Instructions
XA-CC1
 2004 Sony Corporation
Printed in Japan
3-257-674-21 (1)