Adjusting Images - Panasonic 1M Operation Manuals

Adjusting images

● When called from the Door Phone, the Manager Room, or another unit, no image will appear.
Note
(The screen turns blue.)
●The image cannot be adjusted.
Touch during the conversation until
/ /
is not displayed if the settings for for
Installer
Setting
the Door Phone Light have not been made.
Adjusting the Screen Brightness
Touch
Brightness of the monitor screen changes
each time you press the button.
You can adjust the brightness in 5 stages.
Look at the brightness level indicator
while adjusting the screen brightness.
Once adjusted, the brightness setting is
Note
recorded until next adjustment.
Images are difficult to see
Touch
When the background is too bright and the face is dark,
or the face is too bright, you can adjust the image.
changes to
Touch to end image adjustment.
changes to
You cannot adjust images from the separately
Note
installed camera. (
Images are too dark to see
(only for the Unit Entrance)
Touch
When the screen becomes dark because the
background is dark, the built-in light of the
cordless handset of the door phone with
camera lights to make the image easy to see.
changes to
Touch to turn off the light.
changes to
Set "Extension Light Setting" (
"Auto" to perform this function automatically.
is not displayed in images from the Lobby
●
Note
Phone with camera or the separately installed camera.
● Irradiation distance of the built-in light is about 50 cm.
Background further than that is not shown.
appears on the screen
.
.
Page 32)
.
.
Page 71) to
Receiving a Call
Switch
Touch
Bright
Touch
Adjust
Touch
Light
Touch
27