Signal Source; Video Input Setup; Auto Tuning - RCA HDTV User Manual

Main Menu Connections
0
Go Back
Front Input
1
Signal Strength
2
Channel Search
Use this screen if you have misplaced your remote control
3

Signal Source

Signal Source and need a way to tune to a different antenna or to go to
the video inputs. Use the arrows to highlight the rectangle
4
Video Input Source
then press OK or MENU-OK to scroll to the input you want.
5

Auto Tuning

6
Special Features
You can select a source from the available signal sources.
Press OK to continue.
Main Menu Connections
Select the Input 2 video source:
0
Go Back
Component Video (Y PB PR)
1
Signal Strength
Composite Video
2
Channel Search
Select the Input 4 video source:
3
Signal Source Component Video (Y PB PR)
4 Composite Video
Signal Type

Video Input Setup

The component video (Y PB PR) connectors on the TV can
5
Auto Tuning
be changed to accept composite video instead. When using
composite video, connect the yellow RCA cable to the
6
Special Features
Y/VIDEO connector on the TV.
You can select the Air/Cable setting for Antenna A and
Antenna B. Press OK to continue.
Main Menu Connections
0 Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2
Channel Search
Front Input
3
Signal Source
VCR2
Front Input
4
Video Input Setup
DVD
5
Auto Tuning
Front Input
6
Special Features
SAT-CABLE (Satellite or Cable Box)
Front Input
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
Chapter 4
Using the TV's Menu System
Signal Source
The Signal Source menu allows you to choose the source from which you
would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The
same can be accomplished using the component buttons if you've set up Auto
Tuning on the remote or by pressing the INPUT button. But, if you misplace the
remote, this feature gives you another way to tune to a signal source.
Video Input Setup
The Video Input Setup screen lets you choose which type of connection you're
using for the Input 2 and/or Input 4 jack on the back of the TV. If you decide to
change the connection, you need to go back into the Video Input Setup screen.
Auto Tuning
This menu lets you specify the various components you have connected
AUDIO (Audio Receiver/Amp)
to your TV. It lets you program a component button on the remote control
Front Input
RCA SAT2
(VCR, AUX•HD, DVD, SAT•CABLE, or AUDIO) so that pressing the button
Front Input
automatically turns on the TV and turns the TV to the correct Video Input
Channel (go to Chapter 3 for detailed information).
Notes: The AUX•HD button by default is set up for an RCA HDTV Tuner
receiver.
If you have two RCA satellite receivers, you can control each separately.
Program the second receiver with the AUX•HD button using the 5001
code. Then use the RCA SAT2 option in the auto tuning menu to set auto
tuning.
53