Application - Siemens FC700A Hardware Description

B3Q700 Control terminal to FC/FT
20.3

Application

20.4 Functions
76
Siemens Building Technologies
Fire & Security Products
Remote location:
24V supplied from the control unit
–
According to application choose the corresponding Flash program file:
Terminal
Control terminal 'FT700A'
B3Q700 FT700A-1 -> CTY00760 international 1)
1) Default programming at factory by using it as spare part for FC700A, the file CIY00760 must be
downloaded.
The Flash program files are available from the Hotline.
Interfaces
C-Bus → Plug-in terminals 'K5'
–
I-Bus → Connector 'ST1'
–
2 x RS232 → Connector 'ST2'
–
Parallel indicator panel B3R051, Mimic Display Board K3R072 → Connec-
–
tor'ST4'
Emergency operation circuit → Plug-in terminals 'K6'
–
Control inputs
External key switch (see Operation enabled)
–
Monitoring of autonomous power supply
–
Monitoring of Plexiglas door (open / closed)
–
Operation enabled
This is normally done via password at the keyboard
–
An integrated key switch, (photoelectric) is available as an option, which can
–
also be used to lock the Plexiglas door (if used).
Operation can also be enabled by an external key switch
–
Utilisation as
Control terminal and main CPU com-
bined 'FC700A'
FC700A-1 -> CIY00760 international
007831_a_en_--.doc
03.2004