Control Modules; Application Of Control Modules; 17.1.1 Overview Of The Available Modules With Control Outputs; Means Of Linking - Siemens FC700A System Planning Manual

Control modules

17 Control modules
17.1

Application of control modules

17.1.1 Overview of the available modules with control outputs

17.2

Means of linking

Acquisition level
AREA
addressable
SECTION
collective
ZONE
Digital input 'active'
Operating level
Visible statuses:
- active
- switched off
- executed ('Acknowledgem.')
- fault
40
Siemens Building Technologies
Fire & Security Products
Activation of fire control installations (shutting-down ventilation, closing fire
dampers etc.)
Activation and monitoring of alarm device
Activation and monitoring of remote transmission equipment
Activation of Mimic Display panels
Modules Monitored con-
trol lines
For alarm devices
E3G070 2
E3L020
E3G050
E3G060 6
5)
K3R072
K3G060
K3I110
1 Can also be used as control inputs (e.g. 'acknowledgement')
2 These inputs/outputs also serve for the activation of the remote transmission
equipment
3 For activation of Mimic Display panel, connected to the operating terminal
B3Q700 or K3I050 (no I-Bus module) -> Details see chapter 17.7
4 Applicable only with K3R072 -> Details see chapter 17.9
5 Programmable
6 LON-Bus module -> Details see chapter 18.5
Any statuses of entry nodes can be linked to control ZONES
Normally, only 1 control ELEMENT is contained in 1 control ZONE (= control
output)
A user text is allocated to each control ZONE
Statuses:
- alarm
- info
- switched off
- on detector TEST
- fault
- etc.
Operatable functions:
- switch on/off
- activate/de
-activate
Driver outputs Contact outputs
Programmable (Volt free)
Programmable
7
1) 2)
16
1)
48
3)
24 NO contact
16 NO contact
Control level
E3G050
K3I110
E3L020
E3G070
Control
ZONE E3G060
Acknowledgement circuit
Remote transmis-
sion interface
To remote transmis-
sion equipment
8
4)
5)6)
not
monitored
monitored
007836_a_en_--.doc
03.2004