Picture Control Adjustment In The Pc Mode; Dnr; Sound Control Adjustment; Selecting Stereo/Second Audio Program (Sap) - RCA L26HD32D Owner's Manual

Picture
Picture Setting >>
Picture Preference Sports
Picture Size >>
Film Mode On
PC Setting >>

DNR

On
: Select : Adjust
4
Press EXIT/CANCEL to return to the normal
screen.
Picture control
adjustment in the PC mode
You can adjust to optimize the performance of
the TV in the PC mode.
1
Press INPUT SELECT, then press / or
Number button (6) to select the PC mode.
2
Press SETUP/TV MENU. The TV menu screen
will appear.
3
Press or to select "Picture", then press
ENTER.
4
Press or to select "PC Setting", then press
or ENTER.
The PC Setting menu will appear.
PC Setting
Hor Position 25
Ver Position 25
Clock 0
25
Phase
: Select : Adjust ENTER:Set
5
Press or to select the desired item you want
to adjust.
6
Press or to adjust the setting.
Hor To adjust the horizontal position of
Position: the image on the PC mode.
Ver To adjust the vertical position of the
Position: image on the PC mode.
Clock: To minimize any vertical bars
or stripes visible on the screen
background.
Phase: This must be adjusted after the
frequency of the PC mode has
been set to 60Hz to optimize
picture quality (page 38).
7
After adjusting, press ENTER to return to the PC
Setting menu. Then continue to adjust the other
items.
8
Press EXIT/CANCEL to return to the normal
screen.
NOTE:
• If no buttons are pressed for more than approx. 60
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
• The PC settings are not effective for other input
modes.
51F0101A_eng.indd 23
DNR
DNR (Digital Noise Reduction) can reduce
the roughness of the picture. (This function is
available only for analog broadcast.)
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press or to select "Picture", then press
ENTER.
3
Press or to select "DNR". Press
select "On" or "Off".
Picture
Picture Setting >>
Picture Preference Sports
Picture Size >>
Film Mode On
PC Setting >>
DNR On
: Select : Adjust
4
Press EXIT/CANCEL to return to the normal
screen.
Sound control
or
adjustment
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press or to select "Audio" , then press
ENTER.
3
Press or to select the item you want to
adjust.
Audio
Bass 15
Treble 15
Balance 0
MTS Stereo
Audio Language No Info.
HDMI1 Audio HDMI
Speakers On
: Select : Adjust
Bass: Press or
Treble: Press or
Balance: Press or
level from both speakers.
• Press or to change the adjusting item.
4
After you desired setting, press EXIT/CANCEL to
return to the normal screen.
Selecting Stereo/Second
Audio Program (SAP)
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
When the TV receives a stereo or SAP broadcast,
the word "Stereo" or "SAP" displays on-screen
every time you press DISPLAY.
or
or to
or
to adjust the bass sound.
to adjust the treble sound.
to obtain an equal sound
23
3/5/08 5:05:57 PM