Antenna Connections - RCA L26HD32D Owner's Manual

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Antenna
Jack
Antenna
Jack
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
300-75 ohm Matching Transformer
VHF 300 ohm
Antenna
Jack
Combiner
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Antenna
Jack
Combiner
IMPORTANT: Go to page 15 to choose the signal and search for channels.
51F0101A_eng.indd 13
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
75 ohm Coaxial
ohm twin-lead wire, the use of the 300-75 ohm
Cable
matching transformer may be necessary.
300-75 ohm Matching
Transformer
Connect the UHF 300 ohm twin-lead wire to
the Combiner (not supplied). Connect the VHF
300 ohm twin-lead wire to the 300-75 ohm
Matching Transformer. Attach the Transformer to
the Combiner, then attach the Combiner to the
Antenna Jack.
UHF 300 ohm
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the Combiner (not supplied). Attach
the Combiner to the Antenna Jack.
VHF 75 ohm
UHF 300 ohm

Antenna connections

13
3/5/08 5:05:50 PM