Table of Contents
Advertisement
Battery
Compartment
Cover
Magnet
Back of Battery
power
am
tv
fm
dvd
menu
enter
+
–
tune
mute
100
1
2
4
5
7
8
0
Chapter 1
Install the Battery in the Remote
1. Use a coin to remove the battery compartment cover on the back of the
remote.
2. Insert the lithium battery (type CR2025).
3. Put the battery compartment cover back on the remote.
Note: When the remote control isn't in use, the magnet on the back of the
remote attaches to the side of the unit opposite the DVD player for easy storage.
The Remote Control
0-9 and 100 (Number buttons) In TV mode, enter channel numbers directly
through the remote control. To enter a number above 99, for example 113,
press 100, then 1, and then 3.
dvd
Arrow (up, down, left, right) buttons Move through the options on the
disc
menu
on-screen Info Display and DVD menu system.
pix
AM/FM Switches between FM and AM radio.
+
DISC MENU In DVD mode, displays the disc's menu if available.
–
DVD Puts the remote in DVD mode, allowing you to play a disc (DVD, CD,
vol
or MP3).
info
DVD MENU In DVD mode, displays the DVD's menu system when a disc is
not playing (stop mode).
3
ENTER When you're using the arrow buttons to choose an option on the
6
LCD Info Display, press ENTER to select the item.
MUTE Lowers the volume to its minimum level. Press again to restore
9
volume.
PIX (Picture) Displays the picture screen, allowing you to adjust Contrast,
Brightness, Color, and Tint Level.
Connections & Setup
(buttons listed in alphabetical order)
Continued on next page
9
Advertisement
Table of Contents
