Using The Repeat Feature - RCA BLD548 User Manual

Using the Repeat Feature

The default mode for the Repeat feature is OFF. There are three Repeat options:
•
•
•
To Use Repeat:
1. While a disc is playing, press INFO twice on the remote to bring up the Info Display.
2. Highlight the Repeat icon if it's not already highlighted (OFF appears in the icon box).
3. Press the up/down arrow buttons to scroll through the Repeat options (DISC, TITLE, CHPT,
4. Press ENTER on the remote. The selected repeat option loops repeatedly until you turn Repeat
Using the A-B Repeat Feature
A-B Repeat lets you define a specific segment on the disc that you want to repeat. For example,
you might like to watch the dogfight in the movie Top Gun. To watch this scene over and over:
1. Find the spot on the disc that is a few seconds before the beginning of the scene you want to
2. Press INFO twice and highlight the A-B Repeat icon with left/right arrow buttons.
3. Press the up/down arrow buttons or ENTER button on the remote control until the A- appears
4. When you get to the part of the disc that you want to be the end of the repeated segment (the
5. To make the Info Display disappear from the screen, press the INFO button.
Chapter 2
Playing Discs and Using the Radio
DISC – repeats the disc that is playing
TITLE – repeats the title that is playing
CHPT – repeats the chapter that is playing
OFF) until the Repeat option you want appears in the icon box.
off. Repeat is turned off by completing steps 1 through 3 above, and selecting the OFF option.
repeat (this gives you time to access the Info Display and the Repeat feature).
at the beginning of the scene you want to repeat. This sets the start point of the scene.
B point), press the up/down arrow buttons or ENTER button on the remote control. This sets
the end point (B appears). The segment repeats until you turn Repeat off.
23