Tv/Dvd + Dolby Digital Or Amplifier/Receiver - RCA BD1900 User Manual

TV/DVD + Dolby Digital or Amplifier/Receiver

1. Connect the TV/DVD to your cable or antenna
Connect the coaxial cable from your cable or antenna to the UHF/VHF (antenna) jack on
the back of your TV/DVD.
2. Connect a Dolby Digital Receiver or amplifier/receiver to your TV/DVD
A. Connect the audio cables. Connect audio cables (white and red) to the AUDIO OUT
jacks on the back of the TV/DVD (R and L) and to the TV IN Jacks on the receiver
(sometimes labeled AUDIO IN L and R).
B. Or, connect your digital receiver with a digital cable (not provided) to the DIGITAL
AUDIO COAXIAL jack on the TV/DVD to the DIGITAL IN jack on the back of the
receiver.
Chapter 1
Connections & Setup
Go to page 12
11