Table of Contents
Advertisement
Set the TV's Menu Language
In your TV/DVD unit, you will find there are different menu languages. A menu language exists
for the TV part of the unit and another menu language exists for the DVD player of the unit.
Also, different languages exist for the menu, subtitle and audio portions of the disc contents.
Only the TV and DVD menus are discussed in this section. The language of the on-screen TV's
menus is set to ENGLISH. To change the TV's menu language:
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
>
/
/
/
/MENU
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
>
/
/
/
/MENU
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
>
/
/
/
/MENU
Chapter 1
1. Press the SETUP•MENU button to display the TV's menu screen.
2. Press the left or right arrow until the
highlighted.
3. Press the down arrow to highlight LANGUAGE/IDIOMA/LANGUE.
4. Press left/right arrow to display the languages.
5. Press up/down arrow button to select the desired language: English
(ENGLISH), Spanish (ESPANOL), or French (FRANCAIS), then press ENTER.
6. Press SETUP•MENU twice to exit menu.
Set the TV/CATV Signal
The TV/DVD signal is set to the CATV (cable-TV) signal when it is shipped from
the factory. If you are using an outside (off-air) antenna with your TV/DVD,
TV
change the TV signal by following these steps:
ADD
1. Press the SETUP•MENU button to display the TV's menu screen.
2. Highlight the
2. Press the up or down arrow to highlight TV/CATV.
3. Press the left or right arrow until TV (VHF/UHF) appears.
4. Press SETUP•MENU twice to exit menu.
Complete Auto Channel Search
Now that you have selected the signal, you must set up the channel list for all
channels viewable through your antenna or cable TV system. This is sometimes
CATV
called "auto programming."
ADD
1. With the
highlight AUTO CH MEMORY.
2. Press the left or right arrow to begin auto programming.
When the search is complete, the TV/DVD automatically tunes to the first
channel in the channel list.
Connections & Setup
(antenna) icon using the left/right arrows.
(antenna) icon highlighted, press up or down arrow to
(wrench and hammer) icon is
13
Advertisement
Table of Contents
