Connect Via Wi-Fi - D-Link DWR-932 User Manual

Section 3 - Configuration

Connect via Wi-Fi

Note: The following example uses Windows 7's built-in wireless connection utility. If you are using a different operating system, or a third party connection
utility, the process may be different. Please refer to the documentation that came with your operating system or wireless client for further information on
how to connect to a wireless network.
To connect to the router using Wi-Fi, open your operating system's wireless networking utility
and scan for available networks to connect to. By default, the network name (SSID) of the
DWR-932 will be in the format dlink_DWR-932_xxxx, where "xxxx" represents the last four
characters of the DWR-932's MAC address. The default SSID and password can also be found
on the product label attached to the battery cover. For more information on where to find
this label refer to Hardware Overview on page 4.
dlink_DWR-932_0816
Once you have located your DWR-932's wireless network, select it and click Connect.
dlink_DWR-932_0816
D-Link DWR-932 User Manual 10