Macintosh; Pull Down Menu - ESI Julia User Manual

ESI

2. Macintosh

After you completed the hardware and driver installation for Juli@, you need to learn about the Ego
Systems Control utility for Juli@ which allows you to control the settings of the hardware.
The software is built for easy usage. All input and output controls for each channel in the panel are
similar. So, if you know how to control one channel, you can do that for the other channels easily as
well.

1. Pull down Menu

Ego Systems Control
About: Ego System Control version information.
Configuration
Arrow key: Defines how much you can move the sliders (±1.4dB to ±12.0dB) with arrow keys.
Clock Source: Allows you to select the master clock source.
Sample Rate: You can select the sample rate for Juli@, the supported rates are 44.1, 48, 88.2, 96,
176.4, and 192 (kHz)
Cards
Juli@: Normally you can select Juli@ only, however if you have installed another ESI PCI card,
then you can choose the card which you want to control. When you select an entry, the control
panel will be displayed:
You can control input and output level via the faders. The link check box allows you to control the
left and right audio channels simultaneously or independently.
Juli@
29