Driver Installation - ESI Julia User Manual

ESI Juli@

4. Driver Installation

1. PC
After completing the hardware installation for Juli@, you need to install its driver software to use it.
The software installation is not very complicated, even for computer beginners. Just follow the steps
below and you will complete it without hassle. The installation steps under Windows 98SE,
Windows ME, Windows 2000 and XP are a little bit different from each other. The installation
procedure below was written for Windows XP. However, the driver installation procedure is similar
in other Windows version.
* Caution: Depend on your operating system, you may need your Windows install CD.
Please prepare your Windows installation CD before the installation procedure begins.
* Caution: Because of the driver characteristic, Juli@ installs several drivers and in some cases
continuously tries to reboot your system. Unless the driver installation is completely finished until
the system does not detect any new devices, DO NOT reboots the system. After the drivers are
installed completely, restart your computer.
1 Turn on the main power of your computer. Windows will automatically detect that a new
device has been installed and shows the 'Found New Hardware Wizard'.
Choose 'Install from a list or specific location' and click next.
2. Choose 'Search for the best driver in these locations' and Specify the location of the driver.
Insert the provided Driver CD into the CD-Rom drive and select 'Include this location in the
15