6. Test Mode
1. Driving Compartment Test Mode
A. Hold down "2" and "1" keys simultaneously and then press
Hold down "1" and "2" keys simultanesously (each processing for 0.3sec) and then press
S/W) on.
B. The driving compartment can be tested when you press ì 3î key right after entering
into the initial stage of the TEST MODE.
ï Driving Compartment Test
Pre-wash VALVE ON(0.3sec) → OFF(0.3sec) → Main wash(0.3sec) → OFF(0.3sec) →
Rinse VALVE ON(0.3sec) → OFF(0.3sec) → Pump MOTOR ON(0.3sec) → OFF(0.3sec) →
MOTOR RELAY1 ON(0.3sec) → OFF(0.3sec) → MOTOR RELAY2(0.3sec) → OFF(0.3sec) →
MOTOR RELAY2 ON(0.3sec) → OFF(0.3sec) → HEATER RELAY ON(0.3sec) → OFF(0.3sec) →
DOOR OPEN (Function continues when door is closed)
1
2
(POWER S/W) on. (Display shows 'tE')
8
3
(POWER