Table of Contents
Advertisement
8
1. POWER HEAD - Factory Assembled. Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter.
2. STOP SWITCH - mounted on top of the Throttle Trigger Housing. Move switch FORWARD to RUN, BACK to
STOP.
3. FRONT HAND (LEFT) HANDLE - Adjustable for proper cutting attitude and operator comfort.
4. BLADES - Double reciprocating blades mounted to a blade support bar. Double sided blades, are capable of cutting
on either side of the blade.
5. GEAR HOUSING ASSEMBLY - Gear housing assembly fixed straight extension.
6. DRIVE SHAFT ASSEMBLY - Contains the Flexible Drive Cable.
7. THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, depress gradually for
best operating technique.
8. SPARK PLUG - Provides spark to ignite fuel mixture.
9. MUFFLER/SPARK ARRESTOR - The muffler controls the exhaust noise while the spark arrestor prevents hot,
glowing particles of carbon from leaving the muffler where they could possibly start a fire.
10. FUEL TANK - Contains fuel and fuel filter.
11. RECOIL STARTER HANDLE - Pull handle slowly until starter engages, then quickly and firmly. DO NOT pull rope
all the way out or allow the handle to snap back, damage to the recoil starter will occur.
12. FUEL TANK CAP - Covers and seals fuel tank opening.
13. PURGE BULB - Before starting and after filling the fuel tank, pump purge bulb 3-4 times or until a steady stream of
fresh fuel is visible through the "clear" fuel return line.
14. AIR CLEANER - Contains replaceable filter element.
15. CHOKE CONTROL - The choke control lever is located on the top of the air filter case. Move the lever to "COLD
START" to close the choke and back to "RUN" to open the choke.
16. HEDGE CLIPPER SAFETY VIDEO - P/N 99922202800 (Not included with unit and English version only) is available
for your review and purchase at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video over-
views safety precautions and proper operating techniques provided in detail in the Safety Manual, and is supplemen-
tal to the Safety Manual. Read and understand the Safety Manual for complete information on safe operation.
Advertisement
Table of Contents
