Echo SHC-2100 Operator's Manual page 3

Serial number 0517101 & up, shaft hedge clipper
Hide thumbs Also See for SHC-2100:
Table of Contents

Advertisement

M
S
ANUAL
AFETY
Throughout this manual and on the product itself, you will find safety
alerts and helpful, information messages preceded by symbols or key
words. The following is an explanation of those symbols and key
words and what they mean to you.
This symbol accompanied by the words WARNING and
DANGER calls attention to an act or condition that can lead
to serious personal injury to operator and bystanders.
The circle with the slash symbol means whatever is shown
within the circle is prohibited.
S
AFETY
DECALS
Locate this safety decal on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help you
locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal
cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific
information.
HAND GUARD
S
I
YMBOLS AND
MPORTANT
WARNING
This unit is not designed to insulate against hazards associated with the contact of
wires carrying electrical current. To avoid possible injury/death due to electrical
shock or other hazards. DO NOT operate unit if any wires (power, telephone, cable, etc.) are closer than 15
feet (4.5 meters) minimum distance, to any part of the unit or operator. • This unit can be dangerous if used
improperly. • Falling objects and/or blade contact can cause serious injury to operator, helpers and bystanders.
• Keep helpers and bystanders at least 50 feet (15m) clear of operating area.
• To reduce injury risk, READ AND UNDERSTAND the Operator's Manual. Replacement copies are
available through any ECHO Dealer.
• Wear Protective Clothing
(head, hearing and eye
protection meeting ANSI
standards) specified in the
Operator's Manual.
H
C
EDGE
O
'
M
PERATOR
S
I
NFORMATION
IMPORTANT The enclosed message
provides information necessary for the
protection of the unit.
NOTE This enclosed message provides tips for
use, care and maintenance of the unit.
DANGER
STOP engine before making repairs or
blade adjustments. • Keep hand away
from blade.
LIPPER
3
ANUAL

Advertisement

Table of Contents
loading

Table of Contents