Table of Contents
Advertisement
Setup and Connections
Basic Connection Using a Multimedia or HD Monitor
HD Receiver and Multimedia or HD Monitor
SATELLITE DISH ANTENNA
To make the connection:
1.
Connect Audio/Video and S-Video cables.
•
Connect an Audio/Video cable from the HD receiver's AUDIO Right, and Left, and VIDEO jacks to the AUDIO IN Right,
Left, and VIDEO jacks on the Multimedia or HD monitor.
•
Connect an Audio cable from the HD receiver's AUDIO Right and Left jacks to the Multimedia VGA Left and Right
Audio inputs.
•
Connect an S-Video cable from the HD receiver's S-VIDEO jack to the Multimedia or HD monitor's S-VIDEO jack.
2.
Connect the VGA cable.
•
Connect a VGA cable from the HD receiver's HD MONITOR OUT jack to the Multimedia or HD monitor's VGA input
jack, usually labeled DIGITAL TV INPUT (S)VGA.
3.
Connect coaxial cables.
•
Connect a coaxial cable from the ANTENNA A (or B) jack on the HD receiver to your cable outlet, box, or antenna. If
desired, connect another coaxial cable from the vacant ANTENNA jack on the HD receiver to another RF signal.
•
Connect a coaxial cable from your HD receiver's SATELLITE IN jack to the satellite dish antenna.
•
Connect a coaxial cable from the HD receiver's OUT TO TV jack to the TV's input jack, often labeled ANTENNA/CABLE.
MULTIMEDIA or HIGH DEFINITION MONITOR
AUDIO
VIDEO
L
R
S-VIDEO
INPUT
ANTENNA/
CABLE
INPUT
INPUT
HD RECEIVER
R
ACCESS CARD
R
DIGITAL AUDIO
VCR
OUTPUT
CONTROL
SATELLITE
IN
PHONE JACK
DIGITAL TV
INPUT (5)VGA 1
AUDIO INPUTS
R
L
L
L
VIDEO
S-VIDEO
HD MONITOR OUT
AUDIO
OUT TO TV
ANTENNA
ANTENNA
B IN
A IN
CAUTION
Do not stack electronic
components or other
objects on top of the HD
receiver. See Safety
Information on the inside
cover for details.
The ANT B and ANT A
jacks can receive both
digital and analog RF
signals.
Due to copyright
restrictions, you may not
be able to view some
high definition programs
in high definition format
using this product.
CABLE
ALTERNATE RF SIGNAL
11
Advertisement
Table of Contents
