Setup and Connections
Basic Connection
SATELLITE
RECEIVER
SATELLITE IN
VCR
IN FROM ANT
CH3
CH4
OUT TO TV
TV
IN
SATELLITE
DISH
IN
OUT
FROM
TO
ANT
TV
How to View Your Components
To watch satellite programming with this
connection, tune the TV to either channel 3 or
4. (The default is channel 3.) You may change
the output channel to 4 by choosing Systems
CABLE OR
Options from the Main menu and selecting
OFF-AIR ANTENNA
Output Channel.)
To record satellite programming, tune the
receiver to the desired channel and set your
VCR to record on channel 3 or 4.
To view VCR recordings, tune the TV to the
VCR output channel (usually channel 3 or 4)
and set your VCR to play. If your VCR is a
brand other than RCA, GE, or P
may need to program the remote to control
the VCR. See the next section, "Using the
Remote."
CAUTION
Do not stack electronic components or other
objects on top of the receiver. See Safety
Information, inside front cover.
S
, you
RO
CAN
7