6-F Engine Break-In - Dinli DL-90CC Owner's Manual

backing.
NOTE:
If the drive select lever is shifted into reverse
While the engine is running; the engine will
stop unless the parking brake is applied.

6-F Engine break-in

There is never a more important period in the life
of your machine than the period between zero
and 20 hours. For this reason, we ask that you
carefully read the following material.
Because the engine is brand new, you must not
put an excessive load on it for the first 20 hours
various parts in the engine wear and polish
When you shift into reverse, make sure
there are no obstacles or people behind you.
when it is safe proceed, go slowly.
Each full throttle acceleration sequence should
be followed with a substantial rest period for the
engine by cruising at lower RPM so the engine
can rid itself of the temporary build up of heat.
if any abnormality is noticed during this period,
consult a DINLI dealer.
39