Dinli DL-90CC Owner's Manual page 39

Wait for more than 5 seconds and then press the switch again or start the engine by kick lever.
NOTE:
If the engine fails to start, release the start switch
then push the start switch again. Each cranking
should be as short as possible to preserve battery
energy. Don't crank the engine more than 10 seconds
on each attempt.
6-B Start with the kick lever
The vehicle can be started by kick lever, make sure
the vehicle is pre-setted as started by electric starter:
1.Place the vehicle on level ground.
2.Depress the kick lever with force. When the engine
is cold and does not start after kick lever is depressed for
3~4 times, push the throttle lever slightly to facilitate starting.
3.When the engine is started, do not accelerate suddenly,
keep riding at low speed to prolong the engine service life.
4.After the engine is started, return the kick lever to original position.
CAUTION: