Configuring Vmps; Finding Feature Information; Prerequisites For Vmps - Cisco Catalyst 2960 series Configuration Manual

Configuring VMPS

•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.

Prerequisites for VMPS

You should configure the VLAN Membership Policy Server (VMPS) before you configure ports as
dynamic-access ports.
When you configure a port as a dynamic-access port, the spanning-tree Port Fast feature is automatically
enabled for that port. The Port Fast mode accelerates the process of bringing the port into the forwarding state.
The VTP management domain of the VMPS client and the VMPS server must be the same.
OL-29065
Finding Feature Information, page 81
Prerequisites for VMPS, page 81
Restrictions for VMPS, page 82
Information About VMPS, page 82
How to Configure VMPS, page 84
Monitoring the VMPS, page 91
Configuration Example for VMPS, page 91
Where to Go Next, page 92
Additional References, page 93
Feature History and Information for VMPS, page 94
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
5
C H A P T E R
81