How to Configure Normal-Range VLANs
Command or Action
Step 3
end
Example:
Switch(config)# end
Step 4
show vlan brief
Example:
Switch# show vlan brief
Related Topics
Monitoring VLANs
Assigning Static-Access Ports to a VLAN
You can assign a static-access port to a VLAN without having VTP globally propagate VLAN configuration
information by disabling VTP (VTP transparent mode).
If you assign an interface to a VLAN that does not exist, the new VLAN is created.
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. switchport mode access
4. switchport access vlan vlan-id
5. end
6. show running-config interface interface-id
7. show interfaces interface-id switchport
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
50
Purpose
Returns to privileged EXEC mode.
Verifies the VLAN removal.
Purpose
Enters the global configuration mode.
Configuring VLANs
OL-29065