Table of Contents
Advertisement
Product must be installed by a qualified person in
accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorised persons which may also void the
warranty.
Preparation of location and electrical
installation for the product is under customer's
responsibility.
\The product must be installed in accordance
ith all local electrical regulations.
Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed.
Damaged products cause risks for your safety.
Before installation
To ensure that critical air gaps are maintained under
the appliance, we recommend that this appliance is
mounted on a solid base and that the feet do not sink
into any carpet or soft flooring.
The kitchen floor must be able to carry the weight of
the appliance plus the additional weight of cookware
and bakeware and food.
c:
.E
E
E
0
LO
1'--
mmmin
•
It can be used with cabinets on either side but in
order to have a minimum distance of 400mm
above hotplate level allow a side clearance of
65mm between the appliance and any wall,
partition or tall cupboard.
14/EN
•
It can also be used in a free standing position.
Allow a minimum distance of 750 mm above the
hob surface.
•
(*) If a cooker hood is to be installed above the
cooker, refer to cooker hood manufacturer'
instructions regarding installation height (min
650 mm).
•
The appliance corresponds to device class 1 , i.e.
it may be placed with the rear and one side to
kitchen walls, kitchen furniture or equipment of
any size. The kitchen furniture or equipment on
the other side rnay only be of the sarne size or
smaller.
•
Any kitchen furniture next to the appliance rnust
be heat-resistant
(1
00
oc
min.).
Safety chain
The appliance rnust be secured against overbalancing
by using the supplied two safety chains on your oven.
Fasten hook
(1
)by using a proper peg to the kitchen
wall (6) and connect safety chain
(3)
to the hook via
the lockin
mechan~is;;.;.rn;;...>;;;2L..~~~~~~~.....,
2
3
Stability hook
Locking mechanism
Safety chain (supplied and mounted to oven)
4
Firmliy fix chain to cooker rear
5
Rear of cooker
6
Kitchen wall
Stability chain to be as short as practicable to
avoid oven tilting forward and diagonal to avoid
oven side tilting.
Cooker stability chain for cookers not designed with
bracket engagement slot.
Advertisement
Table of Contents
