Installation For Windows; Installing The Ucg102 - Behringer UCG102 Software Installation Manual

guitar link ucg102
To install the USB AUDIO driver, proceed as follows:
1) Power on your computer.
2) Insert the CD into your CDROM drive.
3) Locate the folder "ASIO_driver" on the CD and open it.
4) Double-click on "Setup.exe" to install the driver.
5) Follow the on-screen instructions.
6) Restart your computer after the installation has finished.
To properly configure the driver for audio applications, proceed as follows:
1) Start the ASIO-USB Control Panel from within the audio software (may be called ASIO Config
or similar).
2) In the USB tab, make your choice according to the screenshot.
8
2.

Installation for Windows

2.1 Installing the UCG102

Installation for Windows