Pioneer FH-P800BT Service Manual page 38

1
-
Removing the Cace Unit(Fig.5,6)
A
Remove the two screws.(Fig.5)
1
Remove the five screws
2
and then remove the Cace Unit.(Fig.6)
B
When unplugging the cord assy, make sure to use jig GGF1539.
If the antenna cable is directly unplugged without using jig GGF1539, you might damage your fingertip or fingernail.
C
- How to Remove the Cord Assy
When unplugging cord assy, hook the point of jig GGF1539 on the lid of cord assy and vertically draw out
along with the engagement axis of connector.
D
- How to Attach the Cord Assy
For inserting cord assy, adjust cord assy with the engagement axis of connector and insert it as vertically
as possible.
Do not insert the cord assy in extreme slant, as the connector might suffer damage.
-
Removing the Antenna Unit(Fig.7)
E
Disconnect the Cord Assy using GGF1539.
Remove the two screws
1
ant then remove the Antenna Unit.
F
38
1
2
1
Cace Unit
2
2
GGF1539
Cord Assy
1
FH-P800BT/XJ/UC
2
3
1
2
2
Connector
Cord Assy
1
Antenna Unit
3
4
Fig.5
2
Fig.6
Fig.7
4