Application #2 - Adding A Second Cvxl-112, Cvxl-115, Or Cvxl-215 - Cerwin-Vega CVXL-115 Instruction Manual

Application #2 - Adding a second CVXL-112, CVXL-115, or CVXL-215

A second CVXL-112, CVXL-115, or CVXL-215 loudspeaker can easily be added using a standard XLR/mic cable as in the
example below. A two speaker system can cover a wider audience and situations where more volume is needed. To add
a second CVXL-112, CVXL-115, or CVXL-215 loudspeaker, connect the MIX OUTPUT of the first speaker to INPUT 1 or INPUT
2 on the second speaker then set the level and main volume to an appropriate setting on the first speaker. Be aware that
the main volume on the first speaker will not change the volume on the second speaker so make sure to set the input and
main volume knobs to similar settings.
Amp Connection
1 Input 1 or 2
1 Input 1 or 2
1 Input 3
2 Input 1 or 2
Mode
Switches
Main EQ
(Both Amps)
High Pass 100 Hz
*
Devices with RCA outputs can use INPUT 3 with RCA to ¼" TS cables or plug adapters.
CERWIN-VEGA PROFESSIONAL
Equipment
Microphone (Set switch to MIC)
Acoustic-Electric Guitar (Set switch to LINE)
Keyboard or media player (Line Level)
Mix Out from Amp 1 (Set switch to LINE)
Main
Live or Playback
On or Off
Amp 1
18
Amp 2
Cable Type
XLR
¼" TS (standard guitar cable)
Dual ¼" TS (or RCA*)
XLR or XLR to ¼" TRS