Suunto CB-71/STD Instruction Manual page 9

Combo consoles / console compasses / depth gauge / pressure gauge
Table of Contents

Advertisement

immovable object. Do not subject the gauges to pressures beyond their maximum range. Temperature extremes can be
damaging. In general, the gauges should not be exposed to temperatures to which you would not expose yourself.
CAUTION!
After use, rinse the gauges or the console with fresh water and store them out of direct sunlight, in a dry place at room
temperature.
CAUTION!
Do not attempt to clean the gauges with anything other than water. Use of cleaning agents or compressed air can cause
permanent damage. The introduction of any probe into the water entry port of the depth gauge or the pressure relief
valve opening of the pressure gauge can also damage internal components.
Before prolonged storage the instruments should be removed from the console, rinsed with fresh water and stored
separately.
CAUTION!
Do not attempt to disassemble the gauges. Special tools and training are required to perform the adequate service.
The instruments must be serviced by an authorized dealer every second year or after 200 dives (whichever comes fi rst).
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sm-16Sm-36Cb-71/ds

Table of Contents