Table of Contents
Advertisement
Saving Processed Effects (SAVE)
Saving an Effect
Effects created by changing the parameter values with the
edit function can be stored in one of the two USER memory
banks for later use. Each USER bank has room for 99 effects.
so you can store up to 198 different effects
The following procedure shows you how to store an effect in
one of the USER memory banks.
Memory number display
Multl-dlsplay
SAVE Shuttle ring
-
iii
0".55
-
Bank
BANK/COMPARE
FUNCTION A·F
Number buttons Operation dial
1
2
indicators
Press SAVE.
SAVE: Fat Reverb
Fat Reverb
U1
8
[BANK.] [MEM']
[Name]
[EXEC]
Press FUNCTION A [BANK#] and use the
operation dial to select the user memory
bank (USER 1 or USER 2) where you want
to save the effect.
3
Press FUNCTION B [MEM#] and use the
operation dial or number buttons to select
the memory number (1-99) where you
want to save the effect.
22£N
4
Press FUNCTION C [Name].
The Save: name screen appears in the display.
SAVE: Fat Reverb
~
Fat Reverb
[CLR ] [DEL ]
[INS]
[
>
]
[AB/ab]
[EXEC
1
Use the
Operation dial
(shuttle ring)
Number buttons
FUNCTION A
I</CLRI
to
select icons and characters.
select chJr()cters. Tlw di .. plilY
("h<1n~l'S
ilS shown lx'iow ea",·h time you prl'ss
c(lch button:
It I
1-"-11-('-1
I;!I
2_1>_('_1'_2
I.~J
3_C_II_I_3
m
4-I-K-I.-4
[§J
o_M_N_"_,
[~.J
'_1'_
<.,>-
R_(.
[tl
7-5_1'_ U_7
liil
~_V_W_X_R
lii.J
q_Y_Z_I_'
move the nm'or backward. When the
cursor is all the way to till' Idt,lCI..RI
(clear) appears instead of 1 <) and lets
you emse the entire name.
FUNCTION B IDELI
ddt'll' the character at the cursor
position.
FUNCTION C IlNS]
insert a space at the cursor position.
FUNCTION D I>]
move the
CUfSl)f
fOf\\'.ud.
FUNCTION E IAB/abl switch betw"en capital or small lettl'rs.
FUNCTION F IEXEC)
"Xl""Utl' the sa",' opl'r.,ti'lIl.
Use EXIT to go back to the previous screen if necessary.
5
Press FUNCTION F [EXEC] to execute the
save operation.
The PLA Y screen appears in the display.
Protecting USER Memory
This function locks the contents of the specified USER memory
number so that new effects cannot be saved to that number and the
conknts of that memory number cannot be deleted or written over
by a copy command.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION E to choose "PROTECT."
The operation dial or shuttle ring selects the memory number.
FUNCTION F turns protection on or olf.
Organizing USER Memory
Since each of the USER memory banks can hold up to 99 elfects, you
may find it dilfkult to keep track of where certain elfects are locattod.
The following procedures show you how to copy, move, SW.lp, and
erase effl>cts in the user memory so that you can organize the effects
into a cOlllfortable cc..mfigur(ltion.
Copying a memory file (Copy)
This function lets you copy the contents of a seiL'Ctlod USER or
PRESET memory number to a specified USER memory number.
1 Press SYSTEM.
2 Press FuNCTION B to choose "MEMRY."
3 Press FUNCTION A to ,"hoose "Copy."
FUNCTION A ISOURCI selects the source memory number to be
copied.
FUNCTION B IDEST] specifil'S the destination.
FUNCTION F IEXEClexecutes the copy operation.
Moving USER memory (Move)
This function lets move the contents of a specified USER memory
number to al\other USER memory number.
1 Prl'SS SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Pre'Ss FUNCTION Il to ,"hoo"" "Move."
FUNCTION A ISOURCI selects the source memory number to be
moved.
FUNCTION B I DESTI selects the destination.
FUNCTION F IEXECI executes the move operation.
Exchanging USER memory (XCHG)
This function lets you exchange the contents of two USER memory
numbers.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION C to choose "XCHC."
FUNCTION A IMEM1#1 sek'Cts the first memory number to be
exchanged.
FUNCTION B IMEM2#] sek'Cts the second memory number to be
exchanged.
FUNCTION F IEXEC) Execute'S the exchange operation.
Deleting USER memory (DEL)
This function lets you delete the contents of a USER memory number.
1 Press SYSTEM.
2 Press FUNCTION B to choose "MEMRY."
3 Press FUNCTION D to choose "DEL."
The operation dial or shuttle ring sdccts the
m~mory
number.
FUNCTION F IEXECI eXt'Cutes the delete operation.
23£N
Advertisement
Table of Contents
