Safety Instructions - Behringer EURORACK UB502 User Manual

EURORACK UB502/UB802/UB1002/UB1202

SAFETY INSTRUCTIONS

To reduce the risk of electric shock, do not remove
the cover (or back). No user serviceable parts
inside; refer servicing to qualified personnel.
To reduce the risk of fire or electric shock, do not
expose this device to rain and moisture.
This symbol, wherever it appears, alerts you to the
presence of uninsulated dangerous voltage inside
the enclosure—voltage that may be sufficient to
constitute a risk of shock.
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions
in the accompanying literature. Please read the
manual.
2
All the safety and operation instructions should be read before
the device is operated.
The safety and operating instructions should be retained for
future reference.
All warnings on the device and in the operating instructions
should be adhered to.
All operation and user instructions should be followed.
The device should not be used near water (e.g. near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, near a
swimming pool etc.).
The device should be situated so that its location or position
does not interfere with its proper ventilation. For example, the
device should not be placed on a bed, sofa, rug, or similar surface
that may block the ventilation openings, or used in a built-in
installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
The device should be situated away from heat sources such
as radiators, heat registers, stoves, or other devices (including
amplifiers) that produce heat.
The device should only be connected to a power supply of the
type described in the operating instructions or on the device.
This device must be grounded.
Power cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them,
paying particular attention to cords and plugs, sockets, outlets
and the point where they exit from the device.
The device should be cleaned only as recommended by the
manufacturer.
The power cord of the device should be unplugged from the
outlet when left unused for a long period of time.
Debris and/or liquids should not be allowed to enter the
enclosure through openings.
The device should be serviced by qualified service personnel
when:
s The power cord or the plug has been damaged; or
s Debris or liquid has entered the device; or
s The device has been exposed to rain; or
s The device does not appear to operate normally or exhibits
a pronounced change in performance; or
s The device has been dropped, or the enclosure damaged.
The user should not attempt to service the device beyond that
which is described in the operating instructions. All other
servicing should be referred to qualified service personnel.