Table of Contents
Advertisement
1 Rack mounting
Position in the Rack
This is an example where the recorder (WJ-NX400K) and extension unit (max 5 units) are installed in the rack.
Connect the recorder and the extension unit using the connection cable (1.5 m {4 feet 11 inches}) provided with the unit.
(☞ Page 18)
Recorder
Extension Unit
(Unit number 1)
Extension Unit
(Unit number 2)
Extension Unit
(Unit number 3)
Extension Unit
(Unit number 4)
Extension Unit
(Unit number 5)
Note:
• When installing the extension unit in the rack, leave a space of 1U (44 mm {1-23/32 inches}) above and below the extension
unit for ventilation.
• The unit number is the same as the external storage connector number of the recorder.
(continued)
(Other unit, Rack upper side)
(Other unit, Rack bottom side)
Require a space of 1 unit
Connection cable
(provided with extension unit)
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
17
Advertisement
Table of Contents
