Table of Contents
Advertisement
4 HDD unit
(continued)
How to attach the HDD unit holding bracket
① Insert the HDD unit holding
bracket into the angle hole.
When you transport the extension unit
(1) Remove all the HDD units in the extension unit or fit the HDD unit holding brackets and fix them with screws.
(2) Put the extension unit between the cushions and insert together into the packing box.
Important:
• The extension unit weighs over 10 kg {22.1 lbs}. Be careful not to drop the product when transporting. Dropping may cause
damage, deformation of the extension unit, or injury.
Angle
HDD unit holding bracket
Packing box
①
②
② Fix the HDD unit holding
bracket with a screw while
sliding it to the left.
Cushion
21
Advertisement
Table of Contents
