Dvd Operation; Playback Of A Dvd - Memorex MVDP0803 Manual

IMPORTANT NOTES:
• " " will appear on the screen during operation if you try to access a function that is not
available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, "NO DISC" will
appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position
it with the printed title side facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features
on this DVD player that cannot be used with certain DVDs. There are also extra features that
are different for each DVD disc, so they are not explained in this owner's manual.
• If the unit is in Stop mode, Pause mode or if there is no disc in the disc tray, the screen
saver will appear on the screen after five minutes.
• Press and hold the MENU/AV IN/OUT button to select AV OUT. Otherwise, the display will
not show a picture.
NOTE: If you press and hold this button while already playing a DVD, it will reload the disc.
• There is a RESET button inside the disc door for resetting the system in case it freezes.
You will need a thin pointed object, such as a nail or paper clip, to press the RESET button.

PLAYBACK OF A DVD

1
Press the Power button to turn the unit on;
the Power button will light.
NOTE: To turn this unit off, press the Power
button again.

DVD OPERATION

CONTINUED ON THE NEXT PAGE
2
Slide the Open Door switch downward to
open the unit; "Open" will appear on the
screen. Insert a disc with the label side
facing up on the disc tray.
25