RCA Scenium PHD50300 User Manual page 55

Hd plasma display
Hide thumbs Also See for Scenium PHD50300:
Table of Contents

Advertisement

REFERENCE
*1
Only when using a graphic accelerator board that is capable of displaying 848 X 480.
*2
Aspect ratio is 5:4. This signal is converted to a 600 X 480 line signal.
*3
The picture is displayed in the original r e solution.
*4
The aspect ratiois 5:4. This signal is converted to a 900 dot X by 768 line signal.
*5
Normally the RGB SELECT mode is set automatically. If the pictur e is not displayed pr o perly, set the mode for the input signals listed in the table.
*6
To connect the monitor to a Macintosh computer , use a D-sub 15-pin monitor adaptor with your computer's video port. If your computer has a D-sub
15-pin connector, use an RGB cable.
*7
Other Screen modes are also available.
Notes:
When the input signals comply with the r e solution listed in the table above, the position and size of the pictur emay need to be adjusted.
When a 1280 X 1024 line signal or a 1600 dot X 1200 line signal is input, the pictur
This monitor has a r e solution of 1365 dot X 768 line. It is r ecommended that the input signal be XGA, wide XGA, or equivalent.
Some signals are not accepted with digital input.
The synch may be disturbed when a nonstandar d signal other than those pr e viously mentioned is input.
If you are connecting a composite synch signal, use the HD ter minal.
Chapter 7
Other Information
e will be compressed.
53

Advertisement

Table of Contents
loading

Table of Contents