The Menu System
The Function Menu
The FUNCTION menu contains options that contr o l on-screen displays (other than the menu
system) and how the pictur e is displayed.
FUNCTION
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
ADJ.
SEL.
FUNCTION
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
ADJ.
SEL.
1
4
7
The number 2 position will display on-screen
menus in the top center of your screen.
32
:
ON
: 1
: OFF
: 3
: ON
: 1
RETURN
: ON
:
2
: OFF
: 3
: ON
: 1
RETURN
2
3
5
6
8
9
On-Screen Displays
On-screen displays (different than the menu system) appear by default to
give you information about an option you have selected. For example,
When you switch inputs the curr e ntly selected input name (for example,
CMPNT1) is displayed on the scr e en. To turn on-screen displays off:
1. From the main menu, highlight and select the FUNCTION option.
The FUNCTION menu is displayed.
2. Highlight and select the DISPLA Y option. Use the
on-screen displays on or of f .
Note: Turning the DISPLAY option off does not affect on-screen
menus. Menus can't be turned off.
3. You can continue setting options in the FUNCTION menu, pr ess GO
BACK to return to the main menu, or pr e ss CLEAR to exit the menu
system.
Adjusting the Position of the Menu Display
The on-screen menus can de displayed in dif f erent positions on the
screen. There are a total of nine possible positions shown in the grid on
the right.
To adjust the position of the on-scr e en menus:
1. From the main menu, highlight and select the FUNCTION option.
The FUNCTION menu is displayed.
2. Highlight and select the MENU ADJUST option. Use the
scroll through the menu positions As you pr e ss the
menu will move around to the different positions.
3. When you have the menu in the desir e d position you can pr e ss the
or
arrow to select another option in the FUNCTION menu,
press GO BACK to r e turn to the main menu, or pr e ss CLEAR to exit
the menu system.
button to toggle
button to
button, the
Chapter 6