Table of Contents
Advertisement
Using the TV's Features
VCR1
DVD
VCR2
AUX
With the Auto Tuning feature, you can
set up the TV to tune to the channel
you want to watch by pressing that
component's button. Auto Tuning for
the TV button cannot be set.
46
TV
SAT CABLE
Auto Tuning Feature
The way you set up the Auto Tuning feature in the TV's menu
corresponds to the component buttons on the remote and the way you
have each component connected to your TV. When you set auto tuning,
you're telling the TV what channel to tune to when you press the VCR1,
VCR2, DVD, or SAT•CABLE button on the remote control.
1. Press MENU (the MAIN MENU appears)
2. Highlight Connections and press OK.
3. Highlight Auto Tuning and press OK
4. Highlight the component button field and continually press OK to
scroll through the selection of inputs.
The choices and a brief explanation follow:
Choose this if you don't have this particular
Not Connected
component connected to the TV, or if you don't want the TV to
automatically tune to the correct channel when you press one of the
component buttons on the remote.
Channel 2, 3 or 4 Antenna A
ANTENNA A jack on the back of the TV, and you want the TV to tune to
channel 2, 3, or 4 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 2/3 or 3/4 switch
is set to match the channel in Auto Tuning.
Channel 2, 3 or 4 Antenna B
ANTENNA B jack on the back of the TV, and you want the TV to tune to
channel 2, 3, or 4 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 2/3 or 3/4 switch
is set to match the channel in Auto Tuning.
Front Input Component is connected to the S-VIDEO IN or VIDEO IN
jack on the front of the TV and you want the TV to tune to the front
video input when you press the corresponding button.
Component is connected to a VIDEO or S-Video jack
Input 1, Input 2
on the back of the TV and you want the TV to tune to the video input
channel when you press the corresponding button.
Input 3, Input 4 Compatible component video source, such as a DVD
player or satellite receiver, is connected to the composite/component
VIDEO INPUT jacks (Y•Pb•Pr) on the back of the TV and you want the
TV to tune to the composite/component video input when you press the
corresponding button.
Input 5 Component is connected to the DVI-HDTV jack on the back of
the TV and you want the TV to tune to this input when you press the
corresponding button.
Component is connected to the
Component is connected to the
Chapter 3
Advertisement
Table of Contents
