Using The Input Button - RCA Scenium HD65W140 User Manual

Using the Remote Control

Using the INPUT Button

Input source
ON • OFF
VCR1
DVD VCR2 AUX
MUTE
CH +
1
4
INPUT
button
PIP SWAP
CH CTRL
30
Note: Watch the channel banner to see the input sources change each
time you press the INPUT button.
TV
SAT • CABLE
1. Repeatedly press the INPUT button to scroll through the available input
FORMAT
2. Once you have found the input source you want, stop pressing INPUT.
CLEAR
There are other ways of selecting an input channel:
•
•
AUSE
SKIP
sources until you find the input associated with the component (such as
VCR or DVD player) you want to view.
• If you tune to INPUT 1 and your DVD is connected to that input, you
will be able to view your VCR. To play, stop, or rewind the VCR tape
using the remote that came with your TV, you must first press the
VCR1, VCR2, or AUX button to put the remote control in VCR mode.
Program the component (VCR, DVD, etc.) buttons on the remote control to
automatically tune to the correct input channel when pressed. For more
details on Auto Tuning, see Chapter 3.
When viewing an input, to go back to viewing channels, press ANTENNA,
or press INPUT until you see your channel, or use the number keys to
enter the channel number.
Chapter 2