RCA RLC2626 Operating Instructions Manual page 23

Basic operation (to be continued)
2.Window
This TV supports no higher than 60Hz under PC mode, so please set the refresh
rate of PC to 60Hz. If the frequency is higher than 60Hz, the screen may flicker.
When the TV is in PC mode, press MENU button on the remote control. Press
Arrow button to select "WINDOW".
PICTURE AUDIO
H-POSITION
V-POSITION
CLOCK
PHASE
AUTO ADJUST
ADJUST
1) Adjusting picture H-Position
Arrow button to select "H-POSITION" and press
q p
Press /
set horizontal position of picture.
2) Adjusting picture V-Position
Arrow button to select "V-POSITION" and press
q p
Press /
set vertical position of picture.
3) Adjusting Clock
When PC is connected to TV set because of the difference of PC parameter,you
should adjust the "CLOCK" item in "WINDOW" menu until you get a good picture.
4) Adjusting Phase
When PC is connected to TV set because of the difference of PC parameter,you
should adjust the "PHASE" item in "WINDOW" menu until you get a good picture.
5) Auto Adjust
If there are unexpected problems happened when you adjust the items, you can
select the "AUTO ADJUST" and press
original settings.
Note: Only "H-Position" and "V-Position" are available for YPBPR mode.
22
SETTING FUNCTION WINDOW
100
100
100
0
SELECT ME NU EXIT
PICTURE AUDIO SETTING
H-POSITION
V-POSITION
ADJUST
u
Arrow button, the TV set will resume the
FUNCTION WINDOW
100
100
SELECT EXIT
ME NU
t u
/ Arrow button to
t u
/ Arrow button to
t u
/